Fujitsu Printer FTP 624DSL113 User Manual

BATTERY DRIVE, MICRO LINE THERMAL PRINTER  
2” TYPE MECHANISM AND INTERFACE BOARD  
WITH MINIATURE CUTTER  
FTP-624MCL303/304/FTP-624DSL113  
OVERVIEW  
FTP-624MCL303/304 is a high speed, battery driven thermal  
printer with a miniature cutter, printing on 2-inch wide paper  
(58mm/60mm). A newly developed, long life, compact, light  
weight cutter has been partnered with a FTP-624MCL  
mechanism to produce this new product.  
The design allows easy maintenance, head cleaning, head  
replacement, and cutter replacement.  
This printer is suitable for a variety of applications, such as  
hand held POS terminals, measurement and medical  
FTP-624MCL303/304  
instruments.  
A dedicated LSI (microcontroller) for driving the printer or an  
interface board mounting this LSI is also available.  
HIGHLIGHTS  
• Long life  
Due to our proprietary cutter driving mechanism, the life of  
the cutter is 300,000 cuts.  
FTP-624CU  
• High speed printing  
It can print at 60 mm/s (480 dotlines) maximum by using  
Fujitsu's unique head drive control.  
• Paper auto loading function  
Thermal paper can be loaded without head-up lever  
operation.  
• Two types of cut functions  
Full and partial cut are possible.  
• UL Recognized  
File No. E171434  
FTP-624DSL113  
1
 
FTP-624MCL303/304/FTP-624DSL113  
(Continued)  
Item  
For head  
Specifications  
Voltage: 4.2-8.5 VDC  
Peak current: approx. 2.6 A (conditions: room temp., 7.2 VDC, 64 dots on)  
Voltage: 4.2-8.5 VDC  
Peak current: approx. 0.8 A (conditions: room temperature, 7.2 VDC)  
For motor  
Power  
supply  
Voltage: 5.0 VDC ± 5%  
Current: 0.2 A maximum  
For logic  
For cutter  
Voltage: 5.0 VDC ± 5%  
Current: Approximately 5.0A (in-rush)  
Approximately 1.0A (average)  
Mechanism  
97 (W) × 57 (D) × 38 (H) mm  
131 (W) × 89 (D) × 24 (H) mm  
Approximately 280 g  
Dimensions  
Interface board  
Weight (Mechanism)  
Mechanism  
Pulse durability: 1 × 108 pulse/dot (using Fujitsu Takamisawa's standard  
driving method)  
Expected life  
Wear resistance: 50 km (at 25% print ratio)  
Cutter  
300,000 cuts minimum  
Operating temperature  
Operating humidity  
Storage temperature  
Storage humidity  
Head temperature  
0 to +50°C*1  
20 to 85% RH (no condensation)  
–20 to +60°C (excluding paper)  
5 to 95% RH (no condensation)  
By thermistor (applied energy control, abnormal temperature detection)  
Environmental  
conditions  
Detection  
Paper out/Mark detect  
Head-up  
By photointerrupter  
By microswitch  
For front insertion use (58 mm width) : FTP-020PU001, FTP-020P0104/  
P0701  
For rear insertion use (60 mm width) : FTP-020P0020, FTP-020P0105/  
P0702  
In Europe (58 mm width)  
· Oji Paper  
· NIPPON Paper  
: FTP-021P0060-45  
Recommended thermal sensitive paper  
: PD150R, PD160R-N, PD170R  
: TF50KS-E4,TF60KS-E,TF50KS-E  
: P220VBB-1, AFP-235  
· MITSUBISHI Paper Mills  
*1: Guarantee +5°C to +40°C.  
3
 
FTP-624MCL303/304/FTP-624DSL113  
DIMENSIONS  
Printer mechanism  
Unit: mm  
4
 
FTP-624MCL303/304/FTP-624DSL113  
Interface board  
130.8  
120.7  
105.4  
71.1  
33.0  
5.1  
5.1  
15.2  
CN9  
CN10  
CN6  
CN5  
4-ø3.6  
CN3  
CN11 CN1 CN2  
CN4  
5.1  
56.7  
69.9  
86.4  
5.1  
105.4  
120.7  
17.0  
1.6  
5.0  
Mounting height  
Mounting height  
23.6  
Unit: mm  
5
 
FTP-624MCL303/304/FTP-624DSL113  
CONNECTOR PIN ASSIGNMENT FOR PRINTER MECHANISM  
1. Thermal Head  
Head side : B16B-PH-K-S-2.2 (J.S.T.) or equivalent  
Board side : PHR-16 (J.S.T.) or equivalent  
*1: Symbol: " " means a negative logic signal  
Thermal head heat sink  
Motor  
Head up level  
1, 2, 3, ......................................15, 16  
Connector Pin No.  
2. Motor connectors  
3. Sensor connectors  
Motor side : PHR-4 (J.S.T.) or equivalent  
Board side : B4B-PH-K-S (J.S.T.) or equivalent  
Sensor  
: PHR-5 (J.S.T.) or equivalent  
Board side : B5B-PH-K-S (J.S.T.) or equivalent  
6
 
FTP-624MCL303/304/FTP-624DSL113  
3. Cutter  
Mech side : EHR-4 (J.S.T.) or equivalent  
Board side : B4B-EH (J.S.T.) or equivalent  
FUNCTION  
Item  
Item  
1.  
2.  
3.  
4.  
Test print function  
8.  
9.  
Cutter abnormality detection  
Motor power saving function  
Paper out detection  
Paper near end detection  
Head up detection  
10. Mark detection function  
11. MCU operation abnormality detection  
Thermal head temperature abnormality  
detection  
5.  
12. Power ON/OFF sequence protection  
6.  
7.  
Blow-out fuse detection  
13. Motor over-current protection  
14. Hardware timer  
Head voltage abnormality detection  
Europe  
Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
Fujitsu Component Limited  
Gotanda-Chuo Building  
2132 WV Hoofddorp  
Netherlands  
Tel: (31-23) 5560910  
Fax: (31-23) 5560950  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo 141, Japan  
Tel: (81-3) 5449-7010  
Fax: (81-3) 5449-2626  
Fujitsu Components  
International  
Headquarter  
Offices  
Asia Pacific  
North and South America  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (1-408) 745-4900  
Fujitsu Components Asia Ltd.  
102E Pasir Panjang Road  
#04-01 Citilink Warehouse Complex  
Singapore 118529  
Tel: (65) 6375-8560  
Fax: (1-408) 745-4970  
Fax: (65) 6273-3021  
© 2002 Fujitsu Components America, Inc. All company and product names are trademarks or registered  
trademarks of their respective owners. Rev. 06/2002  
7
 

Echo Chainsaw CS 305 CS 306 User Manual
Eizo Computer Monitor P1700 User Manual
Friedrich Air Conditioner CP05A10 User Manual
Frigidaire Microwave Oven 318201533 User Manual
Garmin Heart Rate Monitor 305 User Manual
GE Answering Machine 00003287 User Manual
GE Cooktop JGP389 User Manual
Gemini MP3 Player MPX 40 User Manual
Giant Water Pump GP7124A User Manual
Gitzo Camcorder Accessories G1564 User Manual