Eclipse Fujitsu Ten GPS Receiver AVN 5500 User Manual

DVD Navigation System with 6.5" Wide TFT Display and DVD Multi-Source Receiver  
MODEL  
INSTALLATION MANUAL  
Be sure to read this installation manual thoroughly prior to installation and making connections. If  
installation methods or non-standard parts not specified in this installation manual are used, accidents  
or injury may result.  
Professional installation is recommended, contact the place of purchase to schedule an appointment.  
After reading the owner's manual and the installation manual thoroughly, keep them in a safe place for  
later reference.  
To dealers:  
Give this installation manual to the customer after installation and all connections have been  
completed.  
Contents  
Components  
2
Before  
installation  
For your safety in using the AVN5500  
Installation Diagram  
3
5
Names and functions of terminals  
Connecting the vehicle speed pulse, parking brake, and reverse wires  
System connection example  
6
10  
12  
Connections  
Installation  
Installing the GPS antenna  
Installing the main unit  
13  
16  
 
For your safety in using the AVN5500  
Warnings and caution signs, illustrated bellow, are posted throughout this manual as well as on the  
AVN5500. They show safe and correct ways to handle the main unit to prevent personal injury to you and  
others and avoid damage to property.  
Before reading through the manual, take time to read through and learn the important information listed in  
this section.  
This "Warning" sign indicates a situation in which incorrect handling may  
result in death or serious personal injury.  
This "Caution" sign indicates a situation in which incorrect handling may  
result in personal injury or may result solely in damage to property.  
This section contains information that can help to prevent problems and  
Tip  
damage to the main unit, and also contain other useful information.  
Do not install this main unit in locations where it may  
obstruct the driver's view, or where it may endanger  
passengers in the vehicle. Otherwise, an accident or  
injury may result.  
Never supply power to another electrical appliance  
by splicing or tapping into this main unit's power wire.  
Otherwise, the current capacity of the wire will be  
exceeded, resulting in a fire or electric shock.  
Do not install this main unit in locations where it may  
interfere with the operation of the steering wheel,  
shift lever, brake pedal, etc. Otherwise, an accident  
or injury may result.  
Never attempt to disassemble or modify the main  
unit. Otherwise, an accident, fire, or electric shock  
may result.  
When installing the main unit into a vehicle with a  
passenger side air bag, do not secure it to the air  
bag's cover or in places where it may impede air bag  
deployment. Otherwise, proper air bag operation may  
not be ensured in the event of an accident, causing  
injury or death.  
To prevent damage to the vehicle, confirm the  
locations of hoses, electrical wiring, and the fuel tank  
prior to drilling holes to install this main unit. Also,  
take precautions so that the main unit does not  
interfere, nor come in contact with them. Otherwise,  
a fire may result.  
When making holes (example: drilling) be sure to  
wear protective eyewear. Otherwise, an injury such  
as loss of eyesight may result.  
When installing this main unit, never use the existing  
nuts or bolts that secure parts of the fuel tank, or the  
steering, or braking systems. Otherwise, improper  
steering, or braking or a fire may result.  
Exposed wires must be insulated with electrical tape.  
Otherwise, a short circuit, fire, or electric shock may  
result.  
To prevent a short circuit from occurring, disconnect  
the battery's negative terminal before installing this  
main unit. Otherwise, an electric shock or injury may  
result.  
Do not modify this system for use other than that  
specified herein. Also, do not deviate from the  
installation procedures described herein; Eclipse will  
not be held liable for damages including, but not  
limited to serious injury, death, or property damage  
resulting from installations that enable unintended  
operation.  
When using an existing nut and/or bolt from the  
vehicle to ground this main unit, do not use any that  
secure parts of the steering or braking systems.  
Otherwise, an accident may result.  
Bundle wires and harnesses with electrical tape or  
wire ties to prevent them from interfering with moving  
parts. If they should entangle with the steering wheel,  
shift lever, or brake pedal, an accident may result.  
This main unit is intended for operation in DC 12volt,  
negative-grounded vehicles only. Never use it in 24-  
volt vehicles such as heavy trucks or diesel vehicle  
with cold-region specifications.  
- -  
3
 
Do not place the vinyl storage bag over a person's  
head. It may cause a serious accident or death by  
suffocation.  
Do not operate the main unit in a malfunctioning  
condition, for instance, when the audio does not play.  
Doing so may result in an accident, fire, or electrical  
shock.  
Do not disassemble or rebuild this main unit. Doing  
so may cause an accident, fire, or electrical shock.  
If an abnormal situation occurs, such as foreign  
matter entering or liquid splashing on the main unit,  
or smoke or a strange odor emitting from the main  
unit, shut off the main unit immediately and consult  
the dealer from whom you purchased it. Continued  
operation may cause an accident, fire, or electrical  
shock.  
When it is necessary to replace the fuse, always use  
a fuse of the correct rating (number of amperes). Use  
of fuses with higher amperage ratings may cause a  
fire.  
For best results, this main unit should be installed by  
a professional installer.  
This main unit must be operated only as on-board  
main unit, or it may cause electrical shock or injury.  
Contact the dealer whom you purchased the main  
unit for an appointment.  
Do not play distorted sounds for long periods of time;  
the speakers may overheat and cause a fire.  
When installing this main unit, be sure to use the  
supplied mounting hardware. If parts other than  
those supplied are used, the main unit may be  
damaged internally, or may not be held in place  
securely and become dislodged.  
Once installation and wiring have been completed,  
return the brakes and electrical equipment such as  
lights, horn, hazard warning lights and turn signal  
lights to their original places, and check that they  
operate correctly. If you use the vehicle while any of  
this equipment is not working correctly, fire, electric  
shocks or accidents may occur.  
Avoid installing this main unit in places where it may  
get wet, such as near windows, or in places that are  
moist or dusty. Presence of liquid, moisture, or dust  
inside this main unit can cause short circuiting  
resulting in smoke or fire.  
Use supplied wire harness with this main unit. Other  
manufacturers may use a similar wire harness  
connector but pin configurations are incorrect for use  
with Eclipse main units and can damage the main  
unit. Prior to powering up the main unit, please make  
sure the main unit is properly grounded with the  
vehicle chassis. If no ground is available to the  
chassis, add a ground strap from the main unit to the  
vehicle chassis to improve the ground.  
If this main unit is not connected properly, a short  
circuit, fire, or accident may occur.  
When routing wires, use precautions to prevent  
contact of sharp metal parts such as brackets or  
screw tips. Otherwise, a short circuit, electric shock,  
fire, or accident may result.  
Do not use with speakers having 1 to 3 ohms  
impedance. This main unit is designed to be used  
with high-powered speakers rated above 50w with  
impedance rating between 4 and 8 ohms.  
Play the audio at a moderate volume level that  
permits you to hear sounds from outside the vehicle.  
Driving without being able to hear outside sounds  
may result in an accident.  
- -  
4
 
Installation Diagram  
10  
GPS antenna  
(When installing inside the vehicle)  
Tip  
10  
GPS antenna  
(When installing outside the vehicle)  
Main unit  
1
Tip  
If installing the GPS antenna inside the vehicle, the location and the slope of the vehicle's windshield  
will determine the accuracy of the GPS antenna to receive the GPS signal. If the GPS antenna  
location inside the vehicle is hindering the accuracy of the GPS antenna, then you may want to install  
the antenna outside of the vehicle.  
The materials used in front and rear vehicle windows can cause GPS reception sensitivity to drop  
significantly. If this happens, install the GPS antenna on the outside of the vehicle.  
- -  
5
 
Name and functions of terminals  
Never cut the insulation on the power wire or use it to power any other equipment. If the rated current capacity of the power wire  
is exceeded, fire and electric shocks may result.  
The wires should be secured with tape or a similar securing method to prevent any obstructions while driving. If they get wound  
or entangled around components such as the steering wheel, shifting lever, or brake pedal, accidents may result.  
If removing the end of the wire to connect to another wire, be sure to wrap PVC tape or a similar wire insulating method around  
the connection to insulate it. If the connection is not insulated, fire or accidents may result.  
Use supplied wire harness with this main unit. Other manufacturers may use a similar wire harness connector but pin  
configurations are incorrect for use with Eclipse main units and can damage the main unit. Prior to powering up the main unit,  
please make sure the main unit is properly grounded with the vehicle chassis. If no ground is available to the chassis, add a  
ground strap from the main unit to the vehicle chassis to improve the ground.  
Do not use with speakers having 1 to 3 ohms impedance. This main unit is designed to be used with high-powered speakers  
rated above 50w with impedance rating between 4 and 8 ohms.  
GPS ANTENNA  
10  
H
MAIN UNIT  
1
1P  
ANTENNA PLUG  
INTERCONNECTING WIRES  
(Video input Video input and  
4
8P  
steering remote control  
connectorconnector)  
G
10  
F
11  
12  
E
10P  
13  
D
C
1
B
2
3
A
4
13P  
6P  
5
6
9
7
8
2
INTERCONNECTING WIRES  
(Power and front speaker connector)  
INTERCONNECTING WIRES  
(Rear speaker connector )  
3
Tip  
Refer to page 7 for details on the wire colors and connection points for interconnecting wires  
, and  
2
and  
.
3
4
Refer to page 8 for details on connection points  
,
,
,
,
, and  
A
B
C
D
E
H
for the main unit wires and terminals.  
- -  
6
 
2
Wire colors and connection points for connection wires  
and  
3
and  
4
Never connect the power supply to the speaker wires (No.6 and No.7),  
otherwise it will cause damage to the main unit.  
Caution  
1
B+ (Yellow)  
Connect where power is constantly available, regardless of the ignition key's position.  
2
ACC (Red)  
Connect where the power comes on when the ignition is in the ACC position.  
3
Illumination power supply (Orange/White)  
Connect to where power comes on when the vehicle light switch is turned on.  
4
Antenna power supply (Blue)  
Connect to the automatic-antenna control terminal of the vehicle.  
5
Control power supply (Blue/White)  
Connect the control terminal for the external amplifier, etc.  
6
Front speaker output wires  
Connect to the front speakers.  
White: Left +  
Gray: Right +  
White/black:  
Gray/Black:  
Left -  
Right -  
7
Rear speaker output wires  
Connect to the rear speakers.  
Green: Left +  
Green/black:  
Purple/Black:  
Left -  
Purple: Right +  
Right -  
8
No connection (Pink)  
Ground (Black)  
9
F
Genuine steering remote control terminal  
Connect to the vehicle steering remote control.  
Compatible vehicle models for installation : Vehicles with voltage detection-type steering remote control.  
Ask your dealer for details.  
G
VTR input terminals  
Connect the output wire of external video main unit such as a VTR.  
Yellow : Video signal  
White : Audio (left) signal  
Red : Audio (right) signal  
- -  
7
 
Main unit connections  
10  
ACC ON/OFF power supply terminal (blue/white)  
If you use this terminal to connect main unit such as an external amplifier, you can still hear the audio guidance  
from the navigation system even when audio is turned off. Connect it to the control terminal for the external  
amplifier or other main unit.  
A popping noise may be heard when the engine is being started or the ignition switch is at the ON position, but  
this is normal and is not the sign of a malfunction.  
11  
Vehicle speed pulse signal wire (Purple/White)  
Connect to the vehicle speed pulse signal terminal.  
12  
Parking brake signal wire (Red/White)  
Connect to the parking brake signal terminal.  
13  
Reverse signal wire (Green)  
Connect the reverse signal output of the vehicle to this terminal.  
E-LAN terminal (13P)  
A
B
Connect to the E-LAN terminal of the CD changer, etc.  
VTR output terminal (Yellow)  
Connect to the monitor with video input.  
Front line-out terminals  
C
D
E
H
Connect to the RCA connector of an external amplifier.  
Rear line-out terminals  
Connect to the RCA connector of an external amplifier.  
Line-out terminals (Non fader)  
This is used for non fader output. It can be used as a sub-woofer terminal if a separate amplifier with  
a low bass filter is connected.  
Back-eye camera external input terminal (4P)  
Used with the Eclipse back-eye camera (sold separately).  
- -  
8
 
-
Vehicle connections  
-
Tip  
You will need to purchase the necessary vehicle component adapter wire for the vehicle so that the  
power supplies can be utilized. (Contact the dealer for further details.)  
Be sure to wrap the connection wires with electrical tape or another insulation method to insulate them.  
-
Example of using vehicle adapter wires  
-
Vehicle harness  
Power supplies  
for combined  
equipment  
From main unit  
Vehicle component adapter wires  
- -  
9
 
Connecting the vehicle speed pulse, parking  
brake, and reverse wires  
Notes on installation  
Check the vehicle speed pulse signal, parking brake signal, and reverse signal carefully before making  
the connections. If the wires are incorrectly connected, accidents or problems with correct operation  
may result.  
The label on the vehicle speed pulse signal wire contains a protection circuit, so do not cut the wire or  
remove the protective circuit, otherwise problems with operation may result.  
Bind the wires together with tape so that they do not cause an obstruction while driving. If they become  
wound or entageled around parts such as the steering wheel, shifting lever, or brake pedal, accidents  
may result.  
Tip  
The locations where the vehicle speed pulse signal wire, parking brake signal wire, and reverse wire may  
vary depending on the vehicle model and grade. Ask the car dealer or your nearest Eclipse dealer for  
details.  
-
A connecting point for the vehicle speed pulse signal (example)  
-
Tip  
Always be sure to connect the vehicle speed  
Vehicle speed pulse  
Engine computer  
signal wire (vehicle harness)  
pulse, otherwise the measurement precision will  
be greatly reduced.  
Use a splicing connector to connect the vehicle  
speed pulse signal wire (purple/white) coming  
from the main unit to the vehicle speed pulse  
signal wire of the vehicle.  
1
2
Vehicle speed pulse  
signal wire  
(purple/white) of  
connection wire  
Route the vehicle speed pulse signal wire to the  
main unit.  
Splicing connector  
8
Contains a protective circuit  
so never remove.  
- -  
10  
 
-
A connecting the point for parking brake (example)  
-
Hand-operated  
Parking brake  
Use a splicing connector to connect the parking  
brake signal wire (red/white) coming from the  
main unit to the parking brake signal wire of the  
vehicle.  
1
Route the parking brake signal wire to the main  
unit.  
2
Attach a splicing  
Parking brake  
Signal Wire  
connector at this location.  
Parking brake  
signal wire  
Foot-operated  
Parking brake  
-
A connecting point for the reverse signal (example)  
-
Tip  
Attach a splicing  
connector at this location.  
Be sure to connect the reverse signal wire. If it is  
Reverse lamp  
not connected, the vehicle position may be  
incorrect when the vehicle is reversed.  
Use a circuit tester to confirm that a sensing  
voltage of 6 V or higher is generated when the  
vehicle is reversed.  
Use a splicing connector to connect the reverse  
signal wire (green) coming from the main unit to  
the reverse signal wire of the vehicle.  
1
2
Route the reverse signal wire to the main unit .  
Reverse signal wire  
Reverse signal wire  
-
Using the splicing connector  
-
Vehicle speed pulse signal wire  
(purple/white), parking brake wire,  
(red/white) or reverse wire (green)  
Insert the connection wire [vehicle speed pulse  
signal wire (purple/white), parking brake signal  
wire (red/white), or reverse signal wire (green)]  
from the main unit and the vehicle wire into the  
splicing connector.  
1
Harness in the car  
Push in the terminal (the metal part) of the  
splicing connector using a pair of pliers.  
2
3
Splicing connector  
8
Press down the cover of the splicing connector  
and squeeze it until it locks.  
Lock  
Splicing connector  
8
- -  
11  
 
System connection example  
Never cut the insulation on the power wire or use it to power any other main unit. If the rated current  
capacity of the power wire is exceeded, fire and electric shocks may result.  
The wires should be secured with tape or a similar securing method to prevent any obstructions while  
driving. If they get wound or entangled around components such as the steering wheel, shifting lever,  
or brake pedal, accidents may result.  
If removing the end of the wire to connect to another wire, be sure to wrap PVC tape or a similar wire  
insulating method around the connection to insulate it. If the connection is not insulated, fire or  
accidents may result.  
Tip  
Install and connect all of the peripheral units before connecting them to the main unit.  
Do not remove any of the protective caps (RCA, etc.) unless in use.  
Be sure to wrap the connection wires with tape (PVC tape) to insulate them.  
BEC105  
(sold separately)  
GPS ANTENNA  
10  
4P  
INTERCONNECTING WIRES  
(Video input Video input and steering  
remote control connectorconnector)  
4
8P  
MAIN UNIT  
1
FROM EXTERNAL  
VIDEO MAIN UNIT  
1P  
TO STEERING REMOTE CONTROL  
ANTENNA PLUG  
10P  
INTERCONNECTING WIRES  
(Rear speaker connector)  
3
13P  
6P  
FRONT  
TO GROUND  
SPEAKERS  
INTERCONNECTING WIRES  
(Power and front speaker connector)  
REAR  
2
SPEAKERS  
CH3083(sold separately)  
POWER CONNECTOR WIRE  
(Supplied with CD changer)  
13P  
TO BATTERY+12V(Permanent Supply)  
2P  
DIN WIRE  
(Supplied with CD changer)  
TO GROUND  
- -  
12  
 
Installing the GPS antenna  
Notes on installation  
The wires should be bound together with tape or a similar securing method (example: wire ties) so that  
they do not interfere with driving. If it becomes wound or entangled around parts such as the steering  
wheel, shifting lever, or brake pedal, accidents may result.  
Do not install the GPS antenna where it will obstruct the driver's vision or where it will be an obstacle  
while driving, otherwise traffic accidents may result.  
Tip  
If the vehicle glass is a special type of glass such as  
heat-reflective glass or bullet-proof glass, be sure to  
install the GPS antenna outside of the vehicle. If the  
GPS antenna is installed inside of the vehicle, the  
reception sensitivity will severely drop and will affect  
the accuracy of the position measurement.  
Do not install the antenna in places (such as front  
pillars and roof panel) that are shielded from the sky.  
The GPS antenna should be installed in a level  
position where the signals will be as unobstructed as  
much as possible, such as on the vehicle's roof.  
Satellite signals cannot be received if the antenna is  
obscured or obstructed.  
If installing the GPS antenna inside the vehicle, be  
sure it is mounted to the ground plate.  
If installing the GPS antenna outside the vehicle,  
remove the main antenna unit if leaving the vehicle  
unattended for long periods in order to prevent theft  
or malicious damage to the antenna.  
If installing the GPS antenna inside the vehicle, the  
location and the slope of the vehicle's windshield will  
determine the accuracy of the GPS antenna to  
receive the GPS signal. If the GPS antenna location  
inside the vehicle is hindering the accuracy of the  
GPS antenna, then you may want to install the  
antenna outside of the vehicle.  
Hold the main antenna unit when removing the  
antenna. Do not pull on the wire, otherwise it may  
become damaged and result in problems with correct  
operation.  
The materials used in front and rear vehicle windows  
can cause GPS reception sensitivity to drop  
significantly. If this happens, install the GPS antenna  
on the outside of the vehicle.  
If installing the GPS antenna outside the vehicle,  
remove the main antenna unit when washing the  
vehicle. (If you wash the vehicle with the main  
antenna unit still attached, avoid spraying the wire  
section directly with water so that no water gets  
inside the vehicle.)  
If the attachment surface is a non-plastic surface  
such as genuine leather, wood panel, or cloth,  
attaching the antenna may damage the surface  
finish. Do not attach the ground plate to such  
surfaces.  
The magnet that is attached to the GPS antenna is  
extremely strong. Be sure to note the following when  
installing the antenna.  
Wipe the installation surface thoroughly so that it is  
clear of any dirt, moisture, or grease before installing  
the antenna.  
Do not put the antenna down on the ground or on  
dirty or dusty surfaces. If iron filings become  
attached to the magnet, they may cause damage  
to the vehicle's body.  
Do not apply any coatings to the GPS antenna,  
otherwise it may cause a drop in the reception  
sensitivity of the antenna.  
Keep the antenna away from watches and  
magnetic cards, otherwise they may be damaged  
and/or rendered unusable.  
Route the GPS antenna wire as far away as possible  
from TV and radio antennas, and wires, otherwise, it  
may cause interference with video and audio signals.  
- -  
13  
 
-
Installation inside the vehicle (example)  
-
Choose an installation location on the dashboard  
which is flat and has a clear view of the sky.  
1
Tip  
Ground plate  
12  
GPS antenna  
10  
Select a location that is at least 20 in. away from  
the main unit. If this is not done, the GPS  
measurement precision will drop.  
Be sure to use the ground plate when installing  
the GPS antenna. If the ground plate is not used,  
the reception sensitivity will drop and will affect  
the accuracy of the position measurement.  
Install the ground plate to the dashboard.  
Install the GPS antenna to the ground plate.  
2
3
Tip  
Front of vehicle  
Tip  
If installing the GPS antenna inside the vehicle, the installation location and the shape of the vehicle's  
body will determine GPS accuracy. Accuracy is usually lower when the GPS antenna is installed  
inside the vehicle.  
Secure the GPS antenna.  
4
5
Route the GPS antenna wire along the crevice  
Tip  
between the front windshield and the dashboard.  
Tape  
GPS antenna  
10  
Tip  
If the GPS antenna wire protrudes from the  
dashboard, wind tape around it so that it stays  
securely fixed in the crevice between the front  
windshield and the dashboard.  
10 GPS antenna wire  
Route the GPS antenna to the main unit's  
installation location.  
6
Front of vehicle  
Tape  
- -  
14  
 
-
Installation outside the vehicle (example)  
-
Choose an installation location where the GPS  
antenna can be attached securely.  
1
Remove the backing paper from the body  
protective sheet and attach the sheet to the  
vehicle.  
2
3
GPS antenna  
10  
Body protective  
sheet (clear)  
13  
Install the GPS antenna on top of the body  
protective sheet.  
Front of vehicle  
Route the GPS antenna wire inside the vehicle's  
trunk and secure it with tape.  
4
5
Tape  
11  
Waterproof cushion  
Attach the waterproof cushion so that the GPS  
antenna wire is flat against the weatherstrip when  
the trunk lid is closed.  
Tip  
To aid in sliding the waterproof cushion in finding  
Front of vehicle  
14  
Wire ti  
the desired mounting location, apply plain or  
soapy water to the waterproof cushion.  
Weatherstrip  
Route the GPS antenna wire while securing it  
with wire ties.  
6
7
Route the GPS antenna wire to the main unit  
while securing it with tape.  
Front of vehicle  
Tape  
Route to  
main unit  
- -  
15  
 
Installing the main unit  
-
Installation angle  
-
Tip  
To maintain proper function, the main unit must be  
mounted less than 30 degrees. If the angle is in  
excess of 30 degrees, DVD/CD skipping and  
improper DVD/CD ejection may occur.  
Front  
30˚ or less  
Level (reference)  
- Mounting the main unit -  
Tip  
Center cluster panel  
Pocket, etc  
Carefully bind any excess length of wire that  
is connected to the main unit and secure it  
to an area of empty space in the vehicle so  
that it does not dislodge or interfere with the  
main unit or vehicle-side  
. If the  
equipment  
wires are not handled correctly, operating  
problems or short-circuits may occur, and  
this may result in the danger of fire or other  
accidents.  
Connect all wires before installing the main  
unit.  
Mounting bolts  
Remove the pocket and any other accessories  
from the center cluster to make room for the main  
unit.  
1
Remove the mounting brackets for the pocket.  
2
3
Attach the brackets to the main unit.  
Main unit  
1
Tip  
Be sure to use the supplied accessory mounting  
screws (Red: M5 x 8) as the mounting screws. If  
any other screws are used, they may damage the  
inside of the main unit.  
Install the main unit in the vehicle.  
4
6
Hex-head bolt  
(Red:M5 x 8) x 8  
Tip  
Mounting bracket  
Be careful not to forcefully push on the main unit's  
display or buttons during installation. This may  
result in damage to the main unit.  
Hex-head bolt  
Flathead  
screw  
6
7
(
Red:M5 x 8) x 8  
(Red:M5x8) x 8  
Select the screws in accordance with the shapes  
of the screw holes in the mounting bracket.  
- -  
16  
 

Estate Range W10162222A User Manual
ETA Systems Surge Protector ETA PD8 User Manual
Extron electronic Switch BB 710M User Manual
Fluke Network Router DTX ELT User Manual
Frigidaire Air Conditioner THRU THE WALL ELECTRONIC CONTROL AIR CONDITIONER User Manual
Frigidaire Microwave Oven FFCE1638LB User Manual
Fujitsu Tablet Accessory FMWCC44 User Manual
GE Ventilation Hood JV347X User Manual
Global Machinery Company Glue Gun DEC005GG User Manual
Global Upholstery Co Patio Furniture 3371CRTL User Manual