Eclipse Fujitsu Ten Car Stereo System CD7200 mkII User Manual

E-iSERV Operation Guide  
CD/USB Multi-Source Tuner with Bluetooth  
wireless technology  
We appreciate your purchase of this CD tuner.  
Please read through this manual for correct operation.  
We suggest that after reading it you keep this manual  
in a safe place for future reference.  
 
Load the downloaded data from the USB memory or CD-R to the unit. For details of  
the operation, see 'Importing display data (DISP Data)' in the Owner's Manual.  
2
 
Audio customize  
Importing Sound Data  
Audio Customize  
Audio Customize provides the best acoustic settings suited for your in-car environment with  
ECLIPSE's unique acoustic correction algorithm.  
How to download the Audio Customize setting les  
Analyze the frequency characteristic and write it to the USB memory. Use the optional  
(MEI-100) microphone to analyze the frequency characteristic.  
1
For details of the operation, see 'Displaying measurement results and save to USB memory'  
in the Owner's Manual.  
Writing measurement results to the USB memory drive  
ATTENTION  
<When using a USB memory drive>  
Sound quality data is written to USB memory drive as follows.  
ECLIPSE  
SOUND  
208 000.ftn  
*
File extension  
Three digit number  
Adjustment mode  
(a: 3 Way, d: 4 Speaker)  
• The folders and les that are required for E-iSERV sound effect customizations are created  
automatically when the data is written to the USB memory drive.  
• Select a le in  
ECLIPSE  
SOUND  
when uploading sound quality data to E-iSERV (website).  
 
Upload the analyzed frequency characteristic data to the E-iSERV website, and make  
adjustment on the website. For details of the operation, see the HELP page on the  
website.  
2
3
Load the adjusted data from the USB memory to the unit.  
For details of the operation, see 'Importing Sound Data (Sound Data)' in the Owner's  
Manual.  
ATTENTION  
<When using a USB memory drive>  
Data downloaded from the E-iSERV website should be saved to folders created in the USB drive  
as shown below (NOTE: in order for the system to properly recognize and load audio customization  
data, the user must create and name their folders as shown in the diagram below).  
ECLIPSE  
Must be created by user  
DATA  
208 X 00 .eis  
Automatically generated filename  
File extension  
*
Two digit number  
Adjustment pattern  
Adjustment mode  
(a: 3 Way d: 4 Speaker)  
• Files retrieved from the E-iSERV website are automatically generated lenames upon  
download.  
<When using a CD-R>  
• The main unit can only import les located in the root directory of the CD-R.  
208 X 00 .eis  
Automatically generated filename  
File extension  
*
Two digit number  
Adjustment pattern  
Adjustment mode  
(a: 3 Way d: 4 speaker)  
• Disc formats that may be used are as follows:  
• CD-ROM (MODE 1)  
• CD-ROM (MODE2_FORM 1)  
* CD-ROMs written in MODE2_FORM2 cannot be read.  
• The loading process may take longer if the CD-R contains unrelated data in addition to  
the audio customization les to be imported.  
 
Steering Remote Control  
Importing steering remote data (U.S.A. only)  
Steering Remote Control  
The vehicle’s factory loaded steering remote becomes inoperable when the CD7200 mkII is  
installed. The ECLIPSE website (E-iSERV) provides software that enables steering remote  
operation even with the installation of the main unit. Import this software into your CD7200 mkII.  
How to operate the Steering Remote Control  
Download the file for Steering Remote setting from the E-iSERV website, then write  
it to USB memory or CD-R.  
1
ATTENTION  
<When using a USB memory drive>  
• Data downloaded from the E-iSERV website should be saved to folders created in the USB  
drive as shown below (NOTE: in order for the system to properly recognize and load steering  
remote data, the user must create and name their folders as shown in the diagram below).  
ECLIPSE  
Must be created by user  
DATA  
Automatically generated filename  
File extension  
XXXXXXX.ssw  
Files retrieved from the E-iSERV website are given automatically generated lenames upon download.  
• The main unit cannot be in USB music playing mode during this procedure.  
<When using a CD-R>  
• The main unit can only import les located in the root directory of the CD-R.  
Automatically generated filename  
File extension  
XXXXXXX.ssw  
• Disc formats that may be used are as follows:  
• CD-ROM (MODE 1)  
• CD-ROM (MODE2_FORM 1)  
* CD-ROMs written in MODE2_FORM2 cannot be read.  
• When data is imported from a CD-R, the importing process well take a long time if a lot  
of data other than the import data has also been saved to the CD-R.  
 
Load the downloaded data from the USB memory or CD-R to the unit. For details  
of the operation, see ' Reading steering remote data (U.S.A. only) ' in the Owner's  
Manual.  
2
ATTENTION  
• This function is available only for the vehicles that have steering remote with the voltage  
detection type interface.  
• For detail of the setting, please contact to ECLIPSE dealer.  
 

Clarion CD Player BD216 User Manual
Craftsman Tiller 91729239 User Manual
Cub Cadet Chipper cs3310 User Manual
Dacor Dishwasher DDWF24S User Manual
Danby Microwave Oven DMW704BL User Manual
Extron electronic Stereo Amplifier D 2 DA4 DVI User Manual
Extron electronic TV Cables M59 5 BNC 100 User Manual
Frigidaire Oven 318205317 User Manual
Fusion Marine Sanitation System MS WR600C User Manual
GE Monogram Ventilation Hood ZVC30LSS User Manual