TM
DE S C R I P T I O N
The Vision Flood Medium (VFM) lower knuckle slip-fits over a standard 2"
pipe size (2 3/8" O.D.) tenon. VFM can be mounted to the following
accessories: Surface Mount Tenon (SMT), Stanchion Mount Tenon (ST), Twin
Mount Arm Tenon (TMT), and Wall Mount Arm Tenon (WMT).
Catalog #
Project
Type
Date
Comments
Prepared by
AC C E S S O R I E S S P E C I F I C A I TO N S
SURFACE MOUNT TENON [SMT]
For above-grade surface mount
placement, the SMT is supplied with a
4" tall standard 2" pipe size (2 3/8" O.D.)
2 3/8" [60 mm]
4" [102mm]
5/16" Dia.
[8 mm]
tenon.
4"
[102 mm]
18"
[457 mm]
5/16"
[8 mm]
Dia.
STANCHION MOUNT TENON [ST]
Used to mount fixture above grade to solid
surface, or partially buried when secured to
6 1/2"
[166 mm] Sq.
5" [127 mm]
concrete pad. Cast luminum housing and
mounting plate is 18" tall and is supplied with
a standard 2" pipe size (2 3/8" O.D.) tenon.
6" [152 mm]
Sq. Bolt Pattern
Stanchion MountTenon
[ST]
VFM VISION
FLOOD MEDIUM
ACCESSORIES
Surface MountTenon
[SMT]
TWIN ARM MOUNT TENON
[VFM-TMT]
Soft form extruded aluminum arm is 42" in
length and features two (2) standard 2" pipe
size (2 3/8" O.D.) tenons for twin fixture
mount. Other lengths and drilling patterns
available upon request. Twin arm base slip
fits over standard 2" pipe size (2 3/8" O.D.)
tenon. End caps are removable for wiring
access. Useful in ground mount and pole
mount applications.
A I M I N G R A N G E
4"
4"
[102 mm]
42" [1067 mm]
[102 mm]
190°
190°
190°
190°
190°
190°
15"
[381 mm]
5"
3/4" [20 mm] Dia.
[127 mm]
Sq. Bolt Pattern
[SMT]
[ST]
WALL MOUNT ARM TENON [WMT]
Extruded aluminum arm with cast mounting
plate is 15" in length and is supplied with a
standard 2" pipe size (2 3/8" O.D.) tenon. Also
useful as an arm extension off square area
light pole.
Twin Arm MountTenon
[VFM-TMT]
Wall Mount ArmTenon
[WMT]
[TMT]
[WMT]
REMOTE SINGLE MOUNT TENON
[750HPS-RSLT]
Intended for 750W HPS applications only.
For above grade surface mount placement,
the 750HPS-RSLT is supplied with a 4" tall
standard 2" pipe size (2 3/8" O.D.) tenon.
Base slip fits over standard 2" pipe size
(2 3/8" O.D.) tenon. Electrical components are
packaged on a slide out tray, and housed in
an extruded aluminum enclosure with
removable die-cast end plates.
4 1/2"
[114 mm]
42" [1067 mm]
20" [511 mm]
4 1/2"
[114 mm]
2 3/8" [60 mm] Dia.
2 3/8" [60 mm] Dia.
[750HPS-RSLT]
[750HPS-RTMT]
Remote
RemoteTwin Arm
MountTenon
[750HPS-RTMT]
Single MountTenon
[750HPS-RSLT]
REMOTE TWIN ARM MOUNT TENON
[750HPS-RTMT]
Intended for 750W HPS applications only.
Electrical components are packaged on a
slide out tray, and housed in an extruded
aluminum enclosure with removable die-cast
end plates. Arm features two (2) standard 2"
pipe size (2 3/8" O.D.) tenons for twin fixture
mount. Twin arm base slip fits over standard
2" pipe size (2 3/8" O.D.) tenon. Useful in
ground mount and pole mount applications.
Consult your representative for additional options and finishes.
AVU050932
|